File manager

File manager - Edit - /etc/sensors3.conf

Back
# libsensors configuration file # ----------------------------- # # This default configuration file only includes statements which do not # differ from one mainboard to the next. Only label, compute and set # statements for internal voltage and temperature sensors are included. # # In general, local changes should not be added to this file, but rather # placed in custom configuration files located in /etc/sensors.d. This # approach makes further updates much easier. # # Such custom configuration files for specific mainboards can be found in # "configs" directory of lm-sensors package. # # Please contribute back a configuration of your board so other users with # the same hardware won't need to recreate it again and again. chip "lm78-" "lm79-" "lm80-" "lm96080-" label temp1 "M/B Temp" chip "w83792d-" label in0 "VcoreA" label in1 "VcoreB" label in6 "+5V" label in7 "5VSB" label in8 "Vbat" set in6_min 5.0 0.90 set in6_max 5.0 * 1.10 set in7_min 5.0 * 0.90 set in7_max 5.0 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.0 * 1.10 chip "w83793-" label in0 "VcoreA" label in1 "VcoreB" label in7 "+5V" label in8 "5VSB" label in9 "Vbat" set in7_min 5.0 0.90 set in7_max 5.0 * 1.10 set in8_min 5.0 * 0.90 set in8_max 5.0 * 1.10 set in9_min 3.0 * 0.90 set in9_max 3.0 * 1.10 chip "w83795g-" "w83795adg-" label in12 "+3.3V" label in13 "3VSB" label in14 "Vbat" set in12_min 3.3 * 0.90 set in12_max 3.3 * 1.10 set in13_min 3.3 * 0.90 set in13_max 3.3 * 1.10 set in14_min 3.0 * 0.90 set in14_max 3.3 * 1.10 chip "via686a-" label in0 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 chip "adm1025-" "ne1619-" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "VCC" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 # Depending on how your chip is hardwired, you may or may not have # +12V readings. # set in4_min 12.0 * 0.90 # set in4_max 12.0 * 1.10 label temp1 "CPU Temp" label temp2 "M/B Temp" chip "lm87-" "adm1024-" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 label temp1 "M/B Temp" label temp2 "CPU Temp" chip "it87-" "it8712-" "it8716-" "it8718-" "it8720-" label in8 "Vbat" chip "fscpos-" "fscher-" #FSC "Hermes" label in0 "+12V" label in1 "+5V" label in2 "Vbat" label temp1 "CPU Temp" label temp2 "M/B Temp" label temp3 "Aux Temp" chip "fscscy-" #FSC "Scylla" label in0 "+12V" label in1 "+5V" label in2 "+3.3V" label temp1 "CPU0 Temp" label temp2 "CPU1 Temp" label temp3 "M/B Temp" label temp4 "Aux Temp" chip "fschds-" # Fujitsu Technology Solutions, "Hades"-Chip # Temperatures label temp1 "CPU Temp" label temp2 "Super I/O Temp" label temp3 "System Temp" # Fans label fan1 "PSU Fan" label fan2 "CPU Fan" label fan3 "System FAN2" label fan4 "System FAN3" label fan5 "System FAN4" # Voltages label in0 "+12V" label in1 "+5V" label in2 "Vbat" chip "fscsyl-" # Fujitsu Technology Solutions, "Syleus"-Chip # Temperatures label temp1 "CPU Temp" label temp4 "Super I/O Temp" label temp5 "Northbridge Temp" # Fans label fan1 "CPU Fan" label fan2 "System FAN2" label fan3 "System FAN3" label fan4 "System FAN4" label fan7 "PSU Fan" # Voltages label in0 "+12V" label in1 "+5V" label in2 "Vbat" label in3 "+3.3V" label in5 "+3.3V-Aux" chip "vt1211-" label in5 "+3.3V" label temp2 "SIO Temp" chip "vt8231-" label in5 "+3.3V" chip "smsc47m192-" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "VCC" set in2_min 3.3 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 label temp1 "SIO Temp" chip "lm85-" "lm85b-" "lm85c-" "adm1027-" "adt7463-" "adt7468-" \ "emc6d100-" "emc6d102-" "emc6d103-" "emc6d103s-" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 # Depending on how your chip is hardwired, you may or may not have # +12V readings. # set in4_min 12.0 * 0.90 # set in4_max 12.0 * 1.10 label temp2 "M/B Temp" chip "emc6w201-" label in2 "+3.3V" label in3 "+5V" label temp6 "M/B Temp" chip "pc87365-" "pc87366-" # Voltage inputs label in7 "3VSB" label in8 "VDD" label in9 "Vbat" label in10 "AVDD" compute in7 @2, @/2 compute in8 @2, @/2 compute in10 @2, @/2 # These are the operating conditions as recommended by National # Semiconductor set in7_min 3.0 set in7_max 3.6 set in8_min 3.0 set in8_max 3.6 set in10_min 3.0 set in10_max 3.6 # Depending on the hardware setup, the battery voltage may or may not # be monitored. # set in9_min 2.4 # set in9_max 3.6 label temp3 "SIO Temp" set temp3_min 0 set temp3_max 70 set temp3_crit 85 chip "adm1030-" "adm1031-" label temp1 "M/B Temp" chip "w83627thf-" label in3 "+5V" label in7 "5VSB" label in8 "Vbat" # Internal resistors compute in3 @ (1 + 34/51), @ / (1 + 34/51) compute in7 @ * (1 + 34/51), @ / (1 + 34/51) set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in7_min 5.0 * 0.90 set in7_max 5.0 * 1.10 # The battery voltage may or may not be monitored. # set in8_min 3.0 * 0.90 # set in8_max 3.0 * 1.10 chip "w83627ehf-" "w83627dhg-" "w83667hg-" "nct6775-" "nct6776-" \ "nct6779-" "nct6791-" "nct6795-" "nct6796-" label in0 "Vcore" label in2 "AVCC" label in3 "+3.3V" label in7 "3VSB" label in8 "Vbat" set in2_min 3.3 0.90 set in2_max 3.3 * 1.10 set in3_min 3.3 * 0.90 set in3_max 3.3 * 1.10 set in7_min 3.3 * 0.90 set in7_max 3.3 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.3 * 1.10 chip "w83627uhg-" label in2 "AVCC" label in3 "+5V" label in7 "5VSB" label in8 "Vbat" set in2_min 5.0 0.90 set in2_max 5.0 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in7_min 5.0 * 0.90 set in7_max 5.0 * 1.10 set in8_min 3.0 * 0.90 set in8_max 3.3 * 1.10 chip "f71805f-" label in0 "+3.3V" set in0_min 3.3 0.90 set in0_max 3.3 * 1.10 chip "f71872f-" label in0 "+3.3V" label in9 "Vbat" label in10 "3VSB" set in0_min 3.3 0.90 set in0_max 3.3 * 1.10 set in9_min 3.0 * 0.90 set in9_max 3.0 * 1.10 set in10_min 3.3 * 0.90 set in10_max 3.3 * 1.10 chip "k8temp-" label temp1 "Core0 Temp" label temp2 "Core0 Temp" label temp3 "Core1 Temp" label temp4 "Core1 Temp" chip "dme1737-" label in0 "5VSB" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "3VSB" label in6 "Vbat" label temp2 "SIO Temp" set in0_min 5.0 * 0.90 set in0_max 5.0 * 1.10 set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "sch311x-" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" label in5 "3VSB" label in6 "Vbat" label temp2 "SIO Temp" set in2_min 3.3 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 set in4_min 12.0 * 0.90 set in4_max 12.0 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "sch5027-" label in0 "5VSB" label in1 "Vcore" label in2 "+3.3V" label in5 "3VSB" label in6 "Vbat" label temp2 "SIO Temp" set in0_min 5.0 0.90 set in0_max 5.0 * 1.10 set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "sch5127-" label in2 "+3.3V" label in5 "3VSB" label in6 "Vbat" set in2_min 3.3 0.90 set in2_max 3.3 * 1.10 set in5_min 3.3 * 0.90 set in5_max 3.3 * 1.10 set in6_min 3.0 * 0.90 set in6_max 3.0 * 1.10 chip "f71808e-" "f71808a-" "f71862fg-" "f71869-" "f71869a-" "f71882fg-" \ "f71889fg-" "f71889ed-" "f71889a-" label in0 "+3.3V" label in7 "3VSB" label in8 "Vbat" compute in0 @2, @/2 compute in7 @2, @/2 compute in8 @2, @/2 chip "f71858fg-" "f8000-" label in0 "+3.3V" label in1 "3VSB" label in2 "Vbat" compute in0 @2, @/2 compute in1 @2, @/2 compute in2 @2, @/2 chip "f71868a-" label in0 "+3.3V" label in7 "3VSB" label in8 "Vbat" label in9 "5VSB" compute in0 @2, @/2 compute in7 @2, @/2 compute in8 @2, @/2 compute in9 @3, @/3 chip "f81865f-" label in0 "+3.3V" label in5 "3VSB" label in6 "Vbat" compute in0 @2, @/2 compute in5 @2, @/2 compute in6 @2, @/2 chip "adt7473-" "adt7475-" label in2 "+3.3V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 label temp2 "Board Temp" chip "adt7476-" "adt7490-" label in1 "Vcore" label in2 "+3.3V" label in3 "+5V" label in4 "+12V" set in2_min 3.3 * 0.90 set in2_max 3.3 * 1.10 set in3_min 5.0 * 0.90 set in3_max 5.0 * 1.10 # Depending on how your ADT7476 is hardwired, you may or may not have # +12V readings. # set in4_min 12.0 * 0.90 # set in4_max 12.0 * 1.10 label temp2 "M/B Temp"

| ver. 1.4 | Github | . | PHP 8.4.15 | Generation time: 4.05 | proxy | phpinfo | Settings